Description
General information: The NORDEX LARGE X band saw has high wear resistance and impact resistance.
Scope of application: heat–resistant alloys, stainless alloys, titanium alloys, nickel alloys, Bimetallic band saws of the Large X series are specially designed for cutting solid and profile blanks of large cross-section.
Features: Ground tooth on both sides. The saw has a tooth angle of attack of 14 degrees. This parameter increases the life of the saw and its performance under the correct cutting and running modes.
The main advantages of the NORDEX LARGE X band saw are:
- precise cutting of blanks of large cross sections of metals that are difficult to cut;
- high heat resistance and wear resistance.
All saws are manufactured in accordance with ISO - 9001 and ISO -14001 standards
Note: Please do not confuse with the LARGE canvas
Characteristics
Specification
| Width / Thickness | Tooth pitch | |||||
|---|---|---|---|---|---|---|
| 0.8/1.3 | 1.3/2 | 2/3 | 3/4 | 4/6 | ||
| 34x1.1 | • | • | • | 1 1/4x.042 | ||
| 41x1.3 | • | • | • | 1 1/2.050 | ||
| 54x1.6 | • | • | • | 2x.063 | ||
| 67x1.6 | • | • | • | 2 5/8x.063 | ||
| 80x1.6 | • | • | 3 1/8x.063 | |||
Similar products
