The NORDEX TNT carbide saw is manufactured with an arrangement of teeth to improve the chip separation process when working with hard steels and alloys.
Scope of application:
- high-speed steels;
- stainless and acid-resistant steels (light);
- stainless and acid-resistant steels (heavy);
- nickel and chromium-based alloys;
- titanium alloys;
- steels with tensile strength> 1000 H/mm
Main technical specifications:
Tooth geometry: trapezoidal and variably beveled. Sharpening: three-sided (fixed
teeth), the front angle is 10-11, the rear angle is 20.
The material of the teeth is carbide (directly fused to the substrate).
Saw body material-steel X32
Peculiarities:
- It has a higher cutting capacity;
- It is well suited for large-section workpieces;
- designed for cutting hard-to-process, especially viscous materials, works well on
equipment that does not require long-term maintenance
| Physical and mechanical properties
| |||||||
|---|---|---|---|---|---|---|---|
| Stamp
| Hardness
| Binder (Co)
| Other Binder (Cr3C2)
| Other Binder (VC)
| Ultimate strength
| Density
| |
| HV30 | HRA | wt% | wt% | wt% | H/mm2 | g/cm 3 | |
| H10F | 1590 | 92,1 | 10% | 0,50% | 4500 | 14,5 | |
Specification:
| SIZE
| 0.75/1.25
| 1/1.5
| 1.4/2
| 2/3
| 3/4
|
|---|---|---|---|---|---|
| 27*0.9
| + | + | |||
| 34*1.1
| + | + | |||
| 41*1.3
| + | + | + | ||
| 54*1.6
| + | + | + | + | + |
| 67*1.6
| + | + | + | + | |
| 80*1.6
| + | + | + |
| Width/Thickness | Tooth pitch Price per meter without VAT, euro | ||||||
|---|---|---|---|---|---|---|---|
| 0.8/1.2 | 1.1/1.6 | 1,5/2 | 1.8/2 | 2/3 | 3 | 3/4 | |
| 27x0.9 | 33,91 | 36,24 | 44,1 | ||||
| 34x1.1 | 36,14 | 46,85 | |||||
| 41x1.3 | 38.65 | 40,69 | 53,44 | ||||
| 54x1.3 | |||||||
| 54x1.6 | 53,44 | 55,06 | 58,36 | ||||
| 67x1.6 | 64,5 | 65,77 | 67 | ||||
| 80x1.6 | 83,83 | 87,99 | |||||
