Description
- An extensive selection of motor spindles and gear spindles with production-optimized rotation speeds and a wide range of torque
- High-performance gear spindle with a drive power of 80 kW and a torque of 2,600 Nm at 40% PV
- Proven cassette tool magazine F. MAG, increased usage time due to the adjustment of 50 tools in parallel to the processing process in a few minutes
- One-of-a-kind comfortable tool management
- The strategy of automatic use of the same type of tools
- Service life control
- Parameters of tools with a practical bias, for example, tool length up to 650 mm and tool weight 50 kg
- High technological readiness due to the proven design of the machine, supported by internal and external diagnostic functions
- An error message in plain text with diagnostic recommendations
- Displaying maintenance intervals in plain text
- Remote diagnostics
- Easy expansion to flexible production modules and systems
- Round Pallet Drives
- Linear and rack-mounted pallet drives
- Loading with portals and manipulators
| Horizontal Machining Center | Type | NBH 1200 |
|---|---|---|
| Operating range | ||
| X-axis stroke | 1.800 [2.600] | |
| Y-axis stroke | 1.250 [1.600] | |
| Z-axis travel | 1.400 [1.780] | |
| Diameter of the collision contour | 2.100 [2.400] [2.800] | |
| Height of the fixture | 1.700 | |
| Displacement measurement system | direct | |
| Integrated into the profile guide | ||
| Optical scale ruler | standard | |
| Positioning error A (DIN ISO 230-2) | mm | 0,010 |
| Pallet / Turntable | ||
| The clamping surface of the DIN 55201 pallet | mm | 1.000 x 1.250 |
| Pallet load | kg | 3.500 [7.000] |
| Table with direct drive from a torque motor, the smallest division step | hail. | 0,001 |
| The rotation speed of the axis In | rpm | 10 |
| Pallet change time according to VDI 2852 | about a second. | 80 |
| Motorspindel | ||
| Max. rotation speed | rpm | 8.000 / 12.000 |
| Drive power 100% (40% PV) | kW | 54x66 / 54x66 |
| Nm | 300x370 / 300x370 | |
| Gear spindle | ||
| Max. rotation speed | rpm | 6.000 x10.000 / 5.000 / 5.000 |
| Drive power 100% (40% PV) | kW | 37x46 / 37x 46 / 60x80 |
| 100% torque (40% PV) | Nm | 908x1.130 / 908 x1.130 / 2.200x2.600 |
| Feed / Accelerated | ||
| Feed range | mm/min | 0 – 40.000 |
| Accelerated travel on the X / Y /Z axes | m/min | 50 |
| Acceleration along the X / Y /Z axes | m/s2 | 5 |
| Disk Tool Store | number of cells | – |
| Max. tool diameter | – | |
| Max. tool diameter | mm | – |
| ... with free adjacent cells | mm | – |
| Max. tool length | mm | – |
| Max. tool weight | kg | – |
| Cut-to-cut shift Time (VDI 2852) | s | – |
| Chain tool shop, cells | q-in | – |
| Max. tool diameter | mm | – |
| ... with free adjacent cells | mm | – |
| Max. tool length | mm | – |
| Max. tool weight | kg | – |
| Cut-to-cut shift Time (VDI 2852) | s | – |
| Shelving / Cassette store | view | the cassette |
| Loading/unloading position [drawer] | q-in | 1 [4] |
| The instrumental cassette | q-in | 3 / [4] / [6] / [8] |
| Number of places for tools | q-in | 150 / 200 / 300 / 400 |
| Max. tool diameter | mm | 125 |
| ... with free adjacent cells | mm | 325 |
| Special tools (ø x width x length) mm | – | – |
| Max. tool length | mm | 650 |
| Max. tool weight | kg | 40 [50] |
| Cut-to-cut shift Time (VDI 2852) | s | 9,5 |
Characteristics
Horizontal Machining Center
With the NBH 1200 machine, due to the large size of the machine base, it is no longer possible to make a single machine bed. Therefore, the bases of the X and Z axes are fixed in position and bolted together over a large area. Due to its heavy weight (the weight of the part is up to 7 tons), the machine is equipped with a proven 2-stroke pallet changer with linear feed. The machine can also be manufactured without a pallet changer for direct loading, for example, using a portal or manipulator.
Under order
By clicking on the button, you consent to the processing of personal data and accept the privacy policy
Similar products
