HW Series

Model		un.of meas.	HW-80	HW-125	HW-170	HW-170L	HW-200	HW-255	HW-320
Table Diameter		mm	⌀80	⌀125	⌀170	⌀170	⌀200	⌀255	⌀320
Maximum Bore Diameter		mm	⌀20	⌀40H7	⌀55H7	⌀55H7	⌀55H7	⌀80H7	⌀90H7
Through Hole Diameter		mm	no hole	22	30	30	30	45	55
Height to Center (Vertical)		mm	90	110	135	135	160	160	210
Maximum Height (Horizontal)		mm	130	185.4	189	189.5	189.5	221	236
T-slot		mm	/	12Н8	12Н8	12Н8	12Н8	12Н8	14Н8
Positioning Key Slot		mm	14Н7	14Н7	14Н7	14Н7	18Н7	18Н7	18Н7
Minimum Indexing Angle		deg.	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°
Reduction Ratio		/	1:40	1:60	1:60	1:60	1:60	1:72	1:72
Max. Rotational Speed (2000 rpm)		rpm	50	33.3	33.3	33.3	33.3	27.7	27.7
Clamping System			Pneumatic	Pneumatic	Pneumatic	Pneumatic	Pneumatic	Hydraulic	Hydraulic
Applied Pressure		kg/сm²	6	6	6	6	6	25	25
Clamping Torque		kg-m	3.5	15	27	27	27	92	152
Servo Motor (Option)	FANUC		/	B4i	B8i	B8i	B8i	B12i	B22i
Servo Motor (Option)	MITSUBISHI		/	HF-105S	HF-104S	HF-104S	HF-104S	HF-104S	HF-154
Accumulated Accuracy		sec	30	20	20	20	20	15	15
Positioning Accuracy		sec	4	4	4	4	4	4	4
Allowable Workpiece Load	vertical	kg	25	50	75	75	75	100	150
	horizontal	kg	50	80	150	150	150	250	350
	Applied Tailstock	kg	50	80	150	150	150	250	350
Allowable Load	Axial Cutting	kgs	500	1000	1500	1500	1500	2000	3000
	Radial Cutting	kgs.m	3	15	27	27	27	92	152
	Side Cutting	kgs.m	8.8	23.6	41	41	41	115	300
Net Weight (without motor)		kg	15	33	60	60	65	120	180