The band saw must meet certain characteristics that determine the quality of the band sawing process.
The band saw must meet certain characteristics that determine the quality of the band sawing process.
In order to purchase a saw, you need to pay attention to specific actions, rules, and a strict sequence of the procedure for choosing this product.
First of all, all the parameters of the workpiece are determined.
These include: mechanical properties of the material, shape, and cross-section dimensions.
Next, the desired step is selected.
Pay attention to the shape of the saw tooth.
The width of the ribbon plate is determined.
Take a closer look at the type of saw you are purchasing.
The geometry of the saw tooth is one of the significant characteristics.
The cutting mode cannot be ignored.
Thus, the size, shape, and steps of the teeth are the main parameters that should be taken into account when purchasing this product.
The technical data sheet of the band saw machine strictly prescribes the length and width, they must exactly correspond to reality.
Saws with a large blade width are much more attractive.
If the material is much harder, then the saw should be selected with a large number of teeth.
It is worth paying special attention to some features.
There are various materials: normal workability, increased hardness.
Incorrect selection of the number of teeth leads to wear and breakage of the saw.
In the event that there are few teeth and the load is large, this leads to problems.
The chip grooves should have an excellent, optimal volume.
A huge amount of chips should not accumulate.
Only by observing all the rules without exception, you will be able to choose a competent, excellent quality band saw that will serve you properly and reliably for a long time.
The geometric parameters of this object and the cutting modes are two points that cannot be ignored.
09 Martha 2017
