Engine oil is a lubricant used in reciprocating engines in order to reduce slipping and wear of spare parts.
The consistency is tested mechanically and thermally before use.
Good oil is a liquid that is slightly diluted with fuel, does not form sediment and does not lose fluidity at low temperatures.
Nordex company presents to your attention several types of oils for transport and off-road vehicles, which you can purchase directly on the website.
Transmission systems
Nordex uses such oils for lubrication:
- transmission elements;
- bridge elements;
- elements of the steering wheel design.
The consistency is used on any element where rotation is transmitted by a gear pair or by the oil itself.
Features of transmission oils:
- prevention of wear and friction;
- heat removal from friction zones;
- cleaning of friction zones;
- anti-corrosion protection;
- reduction of impact force;
- vibration suppression.
Considering that modern car models have different operating modes, manufacturers began to produce transmission oils in accordance with the technical requirements of transport.
You can find a list of them on our website.
Plastic lubricants
These types of lubricants are available in the form of a thick consistency resembling paste.
The paste is produced by introducing thickeners into liquid impurities from petroleum or synthetics.
A grease is a colloid consisting of three components, which has a liquefied base and a thickening phase.
The property of greases is unique, as the composition contains liquid and solid substances.
The consistency is used in areas where access to rapid oil renewal is blocked.
These areas include bearings.
Compressor stations
This type of lubricant is used for the treatment of an automobile air conditioner.
There are different requirements for compressor oils, depending on the scope of their application.
In the automotive industry, such a lubricant is divided into several classes:
- for lubrication of piston and rotary parts;
- to improve the performance of machines on turbochargers;
- for coating and processing units of refrigeration compressors.
- Pistons, valves, cylinders and bearings are lubricated with compressor oil.
Hydraulic
Such types of oils are applicable in hydraulic systems of vehicles, since the main task is to maintain the operability of the actuator.
15 January 2019
