Saw blades with carbide plates (TST) are used for sawing carbide materials, stainless steel and aluminum.
Saw blades with carbide plates (TST) are used for sawing carbide materials, stainless steel and aluminum.
These components for circular saws can be re-sharpened and non-sharpened.
The diameter of such a disk can be different 250-830 mm, as well as the thickness of the disk itself 1.7-2.7 mm.
Such cutters are installed on Wagner, Nishijima, Kastro, Tsune, Sinico, Amada machines.
Depending on the requirements for metalworking, discs with different diameters and thicknesses can be used.
The cutting speed of pipes, blanks and profile elements is very high — in 12 seconds, 20-25 m2 of rolled steel can be qualitatively processed with such a disc.
Moreover, the cut turns out to be absolutely smooth, without notches and chips.
TST tools are the most productive in the band saw class, as special coatings are applied to the discs, and the plates are made of a special heavy-duty carbide alloy.
Most tools are designed for long-term operation at high speed, and when cutting workpieces with a solid section, the quality is optimal.
In addition, there are milling cutter models that are specially designed to work in extreme conditions for high-speed sawing of high-strength thin-walled steel pipes.
Kanefusa disc cutters are made of a fracture-resistant hard alloy and treated with a high-tech coating based on titanium aluminitride.
In addition, the geometry of the teeth has a special shape, thanks to which the cutting surface is of high quality, and the chips are effectively removed.
Due to the special design, there is practically no vibration when cutting thick-walled pipes, due to which the resource of this tool is very high.
09 Martha 2017
