It's no secret that the number of wood species is very large.
Currently, many breeds are involved in the timber processing industry, and this imposes certain difficulties on their processing.
It's no secret that the number of wood species is very large.
Currently, many breeds are involved in the timber processing industry, and this imposes certain difficulties on their processing.
The problem is that even the same type of wood growing in different areas differs in its characteristics.
Therefore, it is very important to take into account possible differences in the processing of different (and even the same) varieties of wood.
To avoid undesirable consequences, it is necessary to use different band saws on wood.
To do this, a preliminary analysis of the characteristics of the wood is carried out, and based on the data obtained, the desired canvas is selected.
For easier analysis, a detailed table will be provided below, which contains all the necessary data.
To sum up in the form of a thesis, the density of wood is directly proportional to the complexity of its processing.
The higher the density value, the more difficult it is to cut!
When processing different rocks, it is important to properly maintain the gap between the web and its guides.
For example, fresh softwood requires increased clearance, but after drying (or when sawing hardwoods) it is better to make this distance a little smaller.
09 Martha 2017
