Emulsion-Type Biostable Metalworking Fluid
The concentrate of the emulsion-type coolant (MWF) consists of mineral oil, emulsifiers, metal corrosion inhibitors, lubricating and biocidal additives. It does not contain harmful substances such as nitrites, phenols, etc.
It is intended for use in 2–12% aqueous emulsions (water hardness 1–7 °Ж) for cutting and abrasive machining of carbon steels, cast iron, and aluminum alloys.
In addition, Advanor M14 B can also be used as concentrated emulsions or emulsol for metal forming operations such as stamping, tube bending, etc.
Advanor M14 B can replace the following fluids in cutting operations: Ratak 6210, Dromus BX, Blasocut 2000 Cl.
Advantages
-
High technological efficiency
-
Biostability
-
Favorable cost compared to imported analogs
-
Easy emulsification in water of various hardness
-
Moderate foaming
-
Toxicological and environmental safety
-
Waste emulsion can be decomposed and disposed of by standard methods
Toxicological Characteristics
-
Favorable sanitary-hygienic and ecological properties
-
Classified as Class A — Non-hazardous substances according to GOST 12.1.007
Packaging, Labeling, Storage
-
Supplied in railway and road tankers, metal drums, and other containers as agreed with the customer
-
Storage according to GOST 1510, at temperatures from –5 °C to +40 °C
-
Guaranteed shelf life: 1 year, provided storage conditions are met
| Indicator | Value | Test Method |
|---|---|---|
| Concentrate | ||
| Appearance at 20 °C | Homogeneous liquid | GOST 6243-75, sec. 1 |
| Odor | Specific, non-irritating | Organoleptic |
| Density at 20 °C, kg/m³ | 860–910 | GOST 3900-85 |
| Kinematic viscosity at 40 °C, mm²/s, max | 50.0 | GOST 33-2016 |
| Moisture content, %, max | 2.0 | GOST 2477-2014 |
| Storage stability | Stable | GOST 6243-75, sec. 6a |
| 3% emulsion (water hardness 4.6 mg-eq/dm³) | ||
| pH value | 9.0–10.0 | GOST 6243-75, sec. 4 |
| Emulsion stability within 4 h | Stable | GOST 6243-75, sec. 3 |
Corrosion Impact on Metals (4 h exposure)
-
Cast iron СЧ18 (GOST 1412-85) → Pass
-
Aluminum АЛО (GOST 11069-2001) → Pass
-
Aluminum alloys D16T, В95Т1 (GOST 4784-97) → Pass
-
Aluminum АЛ-4 (GOST 4784) * → Pass
-
Copper M1 (GOST 859) → Class 1A
* Test in 5% emulsion
Application
| Workpiece Material | Technological Process Group | Recommended Concentration |
|---|---|---|
| Carbon steels | Grinding | 2–3% |
| Turning, boring, drilling, milling | 3–5% | |
| Reaming, threading, broaching | 5–10% | |
| Cast iron | Grinding | 2–3% |
| Turning, boring, drilling, milling | 4–5% | |
| Reaming, threading, broaching | 6–12% | |
| Alloy steels | Grinding | 3–5% |
| Turning, boring, drilling, milling | 5–8% | |
| Reaming, threading, broaching | 8–12% | |
| Aluminum alloys | Grinding | 4–5% |
| Turning, boring, drilling, milling | 5–7% | |
| Reaming, threading, broaching | 8–12% |
